Technical Documentation
KFG-P 2000
mk North America, Inc.
|
105 Highland Park Drive
|
Bloomfi eld, CT 06002
|
(860) 769-5500
|
www.mknorthamerica.com
©2022
|
Page 22
mk North America, Inc.
|
105 Highland Park Drive
|
Bloomfi eld, CT 06002
|
(860) 769-5500
|
www.mknorthamerica.com
©2022
|
Page 23
9
CONVEYOR MAINTENANCE - TENSIONING & GREASING OF DRIVE CHAIN
9.1 KFG-P 2000 AC
25
9.2
KFG-P 2000 AS
26
9.3
KFG-P 2000 AU
27
THIS SECTION DOES NOT APPLY TO THE DRIVE VERSION AF.
Do NOT lubricate timing belt and pulley drive trains.
9
CONVEYOR MAINTENANCE - TENSIONING & GREASING OF DRIVE CHAIN (CONT.)
9.1
Tensioning & Greasing of the Drive Chain - KFG-P 2000 AC
Remove cap nuts (1) and remove the chain guard.
Loosen the mounting screws (1) of the motor (2). Lower the
motor, thereby adding tension to the drive chain (3).
Do not over-tension the drive chain. Proper tension should
allow 2-6 mm of chain movement on one side.
Greasing the Drive Train
The drive chain (1) must be lubricated with grease in
accordance with the maintenance instructions (see Section 6).
Apply the lubricant with a brush to the chain edges, in order for
the lubricant to penetrate the links completely.
* Reassemble in reverse order; ensuring all screws are tight and all guards are in place before operating.
2-6 mm
All work to be performed by qualifi ed personnel only.
Conveyor power must be disconnected before replacing belt.
