MK Martin METEOR 87, Руководство оператора

Страница: 35 / 38

35
87- 97 Meteor Snowblower
Maintenance
• PTO Shearbolt – M10x50 - - 8.8
• Auger Shearbolt – 5/16 x 1 1/4” Gr #2
•
Auger Drive Chain Tightener – tighten chain allowing ¼” sag in the bottom span
of chain (between drive and driven sprocket).
Lubrication
•
Gearbox- check oil level every 50 hours. Fill to oil level plug (middle of gearbox)
with SAE 90 gear oil. SAE 80W90 gear oil may also be used.
• Auger and Shear Sprocket Bearing – grease sparingly every 50 hours. (By using
too much grease you will push the seals off the bearing).
• PTO Shaft – grease every 10 hours. Pull apart and apply grease to he sliding
members. Grease the yoke bearings at this time as well.
• Auger Chain – apply oil on a regular basis especially after using the snowblower.
Storing the Meteor Snowblow er in the off season

At the end of the season lubricate the Bearings, PTO shaft and Auger chain before
storing it.
Notes
Part numbers – Abbreviations
O/L – obtain locally
N --- Nut
LW- Lockwasher

All fasteners are Grade #2 unless otherwise specified.

Customer supplies hydraulic cylinders.