MK Diamond Products MK-Manta III, Руководство пользователя

Страница: 8 / 44

8
MK-MANTA III CORE DRILL
MOTOR
CARRIAGE, COLUMN AND BASE
VACUUM PUMP
WATER SYSTEM
The MK-Manta III Core Drill is a powerful all-purpose drilling rig that is designed to drill holes, up to 14
inches in diameter (16 inches with the 2 inch spacer), in all types of concrete slabs, floors, walls, and
ceilings. The MK-Manta III Core Drill is designed for easy anchoring using masonry anchors. A vacuum
pump is provided to facilitate quick and easy anchoring to smooth floor surfaces.
The MK-Manta III Core Drill is designed for use with a variety of motors. All Milwaukee motors are pow-
erful two speed units that provide the correct cutting speed over a range of diamond drill bit sizes.
The carriage, column and base assembly of the MK-Manta III Core Drill is the strong, sturdy drilling
platform that provides the rigidity needed to quickly drill accurately placed, straight, smooth holes in
all types of concrete. The MK-Manta III’s base is slotted to provide easy anchoring of the drill, in a
variety of drilling situations, with a single masonry anchor. The slot also allows more than one hole
to be drilled from a single anchor location. The base contains four leveling screws to insure accurate
hole alignment even on uneven concrete surfaces. The carriage has a handle and the base has 6"
wheels to provide easy transport. The carriage travel is controlled by a strong rack and pinion gear-
system, that can be locked at any point on the column. The single spoke sliding handle allows the op-
erator to easily control the drilling pressure and speed. At the top of the column is a strong jack-screw
that allows for additional bracing to overhead or opposite surfaces.
The vacuum pump provides quick and reliable mounting to smooth concrete slab and floor surfaces.
The powerful vacuum pump provides 25 inches of mercury (in-Hg) holding power which equates to
over 1400 pounds of force, holding the MK-Manta III Core Drill securely, for safe, accurate drilling.
The pump has a quick disconnect connector on the hose at the base.
The water system for the MK-Manta III Core Drill is a simple hose hook-up and shut-off valve that
provides water flow to the diamond drill bit. The water travels to the center of the bit through the water
swivel and spindle to insure that water is supplied to the cutting end of the bit, even in deep drilling
operations.
MANTA CORE DRILL III FEATURES