MK Diamond Products MK-2013 HE, Руководство пользователя

Страница: 4 / 42

MK-20 SERIES Revision 09/06, Effective Date September 18, 2006
4
Saw Features
The MK-20 Series Concrete Saw is designed for wet or dry, high production flat and general industrial application
sawing. The heavy duty steel, one piece box frame is precision jig welded and reinforced. This precisely reinforced steel
construction with balanced weight distribution and ergonomic handlebars assures straight and accurate cutting as well
as ease of operations preventing fatigue. The 4-cycle air cooled engine is located for easy access and maintenance.
Each solid rubber wheel is mounted on an axle for years of reliable use. The rear axle is rigid, while the front axle pivots
causing the blade to be lowered to the desired cutting depth. The positive screw feed provides precision control of the
raising and lowering of the blade. The positive screw feed control wheel and all controls are located for easy access and
visibility. The following table shows the available models and the features that differentiate them.
MK-20 Series Concrete Saw
Engine
The MK-2013HSP features a Honda ™ GX390 13 hp engine. The MK-2013HE features a Honda GX390 with electric start. The MK-
2020 HSP features a Honda™ GX620 20 hp engine with electric start and key ignition switch and 16” blade guard.
Model
Engine/Blade Capacity
Additional Features
Honda GX390 13 hp
16” blade guard
MK-2013 HSP
cyclone air filter, tach/
hourmeter
MK-2020 HSP
Honda GX620 20 hp
20” blade guard
electric starter, tach/
hourmeter, centrifugal
water pump (optional)
Honda GX390 13 hp
16” blade guard
MK-2013 HE
electric starter, tach/
hourmeter, centrifugal
water pump (optional)
Other important messages that are designed to help prevent damage to your MK-20 Series concrete saw, other property, or the
environment are preceded by the word notice.
Your MK-20 Series concrete saw or other property could be damaged if you don’t follow instructions.
Safety labels are located according to the chart below and the parts list starting on page 15. The labels contain important safety
information. Please read them carefully. These labels are considered a permanent part of your saw. If a label comes off or becomes
hard to read, contact MK or your dealer for replacement.
damage prevention messages
safety label locations
notice
Always use approved respiratory protection.
( (
)
)
on
( (
)
)
on
Respiratory Protection!
Always use approved hearing protection.
( (
)
)
on
( (
)
)
on
Hearing Protection!
Item Location Description Part #
C6 Top of Belt Guard Spark Plug Caution Label 155579
C7 Front of Belt Guard Belt Tension Caution Label 155583
C8 Top of Shaft & Belt Guard Guards in Place Caution Label 155587
D15 Top of Blade Guard Lift Guard Caution Label 155586
G13 Top of Console Tower Central Control Panel 156749
G14 Back of Console Tower Water On/Off 154404
G15 Back of Console Tower Engage 154405
G16 Back of Console Tower Disengage 154406
G17 Back of Console Tower Engine Stop 156601
L19 Top of Gas Tank Hot Surface Caution Label 155578
L20 Top of Gas Tank Refueling Warning Label 155580
L21 Front of Gas Tank California Danger Label 155581
L22 Top of Gas Tank Lethal Exhaust Danger Label 155582
M7 Front Edge of Frame Hands and Feet Caution Label 155585
O4 Center of Handlebar Handle Lifting Warning Label 156627