manualshive.com logo in svg

MK Diamond Products MK- 2005G, Руководство пользователя и инструкции по эксплуатации

Поделиться
Скачать
MK Diamond Products MK- 2005G Скачать руководство пользователя страница 53

 

MK-2005G 

Revision 12/00, Effective Date December 26, 2000 

 

Page 53

EXPLODED VIEW AND PARTS LIST 

 

1. Remove P#155494(5/16-18x2 screw), P#156961(upper shock mount), and      
#151053(fender washer) at location A. 
2.  Attach support arm(itme3) to engine guard(item 1) with items 9, 10, 11, and 12. Fasten   
the screw and nut loosely. 
3. Fit engine guard onto the engine upper mounting plate. 

Meanwhile, Screw item 8 through items 5 and 6 into the threaded hole on the side of the                  
engine. Do not tighten the screw. 

4.  Install item 4, 5 and 6 through engine guard and engine upper mounting plate. Fasten 
the screw and nut loosely. 
5. Reinstall items removed listed in step 1. 
6.  Secure all fasteners after placing engine guard in correct position. 

 

 
**Note: Drilling two 11/32 dia. holes in engine upper mount (item2) are required on all old 
style upper mounts.  

Содержание MK- 2005G


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды