MK Diamond Products 160028, Руководство пользователя и список запчастей

Страница: 16 / 40

16
MK-377EXP SAW INSTALLATION
(D)
Align the Cutting Head Retaining
Holes to the holes on the Post.
Follow the assembly instructions to prepare your MK-377EXP for operation.
CUTTING HEAD INSTALLATION
(B)
Remove the Blade Guard
Wingnut and then remove
the Blade Guard.
(A)
Loosen the Blade Guard
Retaining Knob.
(C)
Locate and remove the three
Cutting Head Retaining
Screws using a Phillips
Screwdriver.
(B)
Loosen the Blade Guard
Retaining Knob and open
the Blade Guard.
(A)
Loosen the Blade Guard
Retaining Wingnut.
(C)
Place the Shaft Wrench on
the Motor Shaft rotate blade
shaft so shaft wrench is
engaged.
DIAMOND BLADE INSTALLATION
When installing the Retaining Screw, do not "cross-thread" and DO NOT over tighten the screw.
NOTE:
(E)
Install the three Cutting Head
Retaining Screws using a
Phillips Screwdriver.
(F)
Install the Blade Guard
and tighten Wingnut and
Retaining Knob.