18
MK-2000 ELECTRIC SAW
ASSEMBLY
ASSEMBLY (Optional)
(A )
Open the stand and place
it on flat surface.
If using the MK Diamond Stand, follow these steps.
MOVABLE CUTTING TABLE INSTALLATION
FOR 2002E & 2002-16 CORE SAWS
(A)
While holding the front, position
movable Cutting Table roller wheels
above Guide Rails.
(A)
Install Core Holder on to table.
(MK-2002E Saw)
(B)
Seat movable Cutting Table roller
wheels on saw Guide Rails.
(B)
Install Core Clamp on to table.
(MK-2002-16 Saw)
(C)
Verify movable Cutting Table is
seated correctly by moving table
back and forth
(C)
Use insert for 4in cores.
(B)
Set saw on stand as
shown.
(C)
Ensure pins are placed
through holes on frame.
NOTE:
