13
The MK-2000 Electric Saws is equipped with a number of safety decals provided for operator safety
and maintenance information. Should any of these decals become unreadable, replacements can be
obtained by calling (800) 262-1575.
OPERATION & SAFETY DECALS
MK-2000 ELECTRIC SAW
SAFETY
Decal/Label Location
Description
A
Motor - Back
Warning - Dust Control
B
Cutting Head
Warning - Read and Follow Operating Instructions
C
Motor - Side
Caution - Use with GFCI only
D
Motor - Side
Caution - Receptacle for water pump
E
Blade Guard
Caution - Guards in Place
F
Motor - Back
QR Codes for Manuals and Safety
G
Blade Guard
Warning - Silica Prop 65
• This Equipment may produce Dust
or Mists containing Crystalline Silica.
• Employ Dust Controls and Protection
per OSHA/NIOSH/MSHA.
WARNING
!
Label #164202
Part # 164202
A
Part # 154822
Receptacle is for water
pump only.
125V .6 amps max.
!
CAUTION
Label #154822
D
Part # 170480
Scan for safety information
Scan for manuals
Label #170480
F
Part # 155678
!
CAUTION
This saw is to be used
with a Ground Fault
Circuit Interrupter.
Label #155678
C
Part # 154398
DO NOT operate
this equipment
before reading the
owner’s manuals.
WARNING
!
Label #154398
B
G
!
WARNING:
This equipment contains chemicals known to
the State of California to cause cancer and birth defects or other
reproductive harm. These chemicals are contained in various
components, fluids and paint, including but not limited to, fuel, oil,
electric motors and batteries. In addition, gasoline/diesel powered
equipment emits engine exhaust and fumes, and when serviced,
cleaned or maintained generate used oil, waste fluids, fumes,
grease, grime and particulates from component wear and silica
dust which contain chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov.
Label #172641
Part #172641
Part # 155587
CAUTION
DO NOT
operate without
guards in place.
!
Label #155587
E
