2 7
Features
●
Power supply: AC100V-240V
●
Frequency: 50-60Hz
●
Power consumption: 108W
●
Light source: 6pcs 18W high brightness 6IN1 LED
●
Lamp life: 6-10 ten thousand hrs
●
LED angle: 30(±5) degree
●
Color: 16.7 million kinds of color change
●
Control channels: 6/10 CH
●
Battery power & wireless DMX
●
Wireless DMX-512 protocol
●
Built in 2.4G receiver/ transmitter for wireless DMX operations
●
Control mode: DMX512, Master/slave, Auto, Sound, IR Remote, Wifi mode
●
Automatic model(by function button) : color change, color strobe, color dimmer,
color gradual change/color jump change
●
Operation menu: 4 digit digital LED display
●
Packing size: 295*190*320mm
●
N.W: 4.2kg
●
G.W: 4.8kg
Safety Precautions
●
To reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
●
Do not spill water or other liquids into or on to your unit.
●
Be sure that the local power outlet match that of the required voltage for your
unit.
●
Do not attempt to operate this unit if the power cord has been frayed or broken.
Do not attempt to remove or break off the ground prong from the electrical cord.
This prong is used to reduce the risk of electrical shock and fire in case of an
internal short.
●
Disconnect from main power before making any type of connection.
●
Do not remove the cover under any conditions. There are no user serviceable
parts inside.
●
Never operate this unit when it
‟
s cover is removed.
●
Never plug this unit in to a dimmer pack.
●
Always be sure to mount this unit in an area that will allow proper ventilation.
Allow about 6” (15cm) between this device and a wall.
●
Do not attempt to operate this unit, if it becomes damaged.
●
This unit is intended for indoor use only; use of this product outdoors voids all
warranties.
For Battery Function and Charge:
●
There are two switch on the rear panel of the lighting. One is for light power, and
the other is for light charger.
1. When the light need charger you need turn on the charger switch.
2. When the light need use you need turn on the power switch.
●
The battery can last for 4-4.5 hours when all LEDs on after full charge , and can
last for more than 15-17 hours on auto running mode. Up to 19 Hours with one
color diode on. Results will vary based on brightness of LEDs.
●
It is suggested to charge the battery for at least 4 hours, which will extend the
life span of the battery.
●
When the battery charge, the dual LED indicator will change from red to green
at the bottom of light,This indicator become to green, the battery is full
charge.
1.Batter charge On/Off 2.Power On/Off 3.LCD display
4. Menu switchs 5.Power LED 6.DMX LED
7. ID code selector 8.Wireless LED 9.Battery LED
10. DMX-Out socket 11. DMX-In socket 12. Power out
13. Power in 14. Antenna
Note:
When the light need charge, please turn on the
○
1
