MJ LED LIGHTNING MJ-1350N, Руководство пользователя

Страница: 7 / 10

BEAM SPOT WASH (3IN1) 350W BEAM SPOT WASH (3IN1) 350W
Note: Care should be taken to ensure that none of the pins touch the metallic body of
the plug or each other. The body of the plug is not connected in any way. The XLED
590 accepts digital control signals in protocol DMX512 (1990).
Connect the controller’s output to the first fixture’s input, and connect the first fixture’s
output to the second fixture’s input and connect the rest fixtures in the same way.
Eventually connect the last fixture’s output to a DMX terminator as shown in the figure
below.
DMX Terminator:
In the Controller mode, at the last fixture in the chain, the DMX output has to be
connected with a DMX terminator. This prevents electrical noise from disturbing and
corrupting the DMX control signals.
The DMX terminator is simply an XLR connector with a 120Ω (ohm) resistor
connected across pins 2 and 3, which is then plugged into the output socket on the
last projector in the chain. The connections are illustrated below.
4
Channel List:
Channel Function Value Effect
CH1 Pan 0-255
0--540°
CH2 Tilt 0-255 0--270°
CH3 Pan Fine tune 0-255 0--2.1°
CH4 Tilt Fine tune 0-255 0--1.0°
CH5 P/T speed adjustment 0-255 fast---SLOW
CH6 Frost 0-255 turn off--open
CH7 Dimming 0-255 Dimming0%--Dimming100%
CH8 Strobe
0-10 The shutter is closed
11 Slow strobe
…… ……
250 Fast strobe
251-255 The shutter is open
CH9 Colour
0-4 White light
5-9 Colour1
10-14 Colour2
15-19 Colour3
20-24 Colour4
25-29 Colour5
30-34 Colour6
35-39 Colour7
40-44 Colour8
45-49 Colour9
50-54 Colour10
55-59 Colour11
60-64 Colour12
65-69 Colour13
11