Mizuho MOT-VS500SK Скачать руководство пользователя страница 45

Страница: 45 / 62

Operation

NOTE

WARNING

•

CAUTION

•

■

Attaching the head plate

Make sure to tighten the head plate fixing handles

securely.

If the head plate moves with the handles in a

loosened state, the patient may get injured.

The head plate weighs 7kg (15.4 lbs).

Pay special attention when handling it.

It may drop and cause damage or injury.

The head plate can be

attached by inserting it into

the reception hole of the

leg plate as a leg extension

plate.

Do the same as for the back

plate, fix rhe head plate by

tightening the head plate

fixing handle on the back of

the leg plate.

Hold the both sides of the head plate firmly and align the
insertion shaft of the head plate with the reception hole in
the back plate, and insert.

After checking that the head plate is completely inserted,
tighten the two head plate fixing handles located on the
lower side of the back plate.

Head plate fixing handle

Head plate

Back plate

Be sure to insert the head plate into the back plate.

If the operating table is used with the head plate

inserted incompletely, it may get damaged.

Do not move the operating table by pulling on the head

plate. The head plate may come off and cause damage

or injury.

Содержание MOT-VS500SK































































Результаты поиска

Содержание MOT-VS500SK

Отзывы:

Mizuho MOT-VS500SK, Руководство оператора, Страница: 45 / 62

Результаты поиска

Содержание MOT-VS500SK

Отзывы: