Mizuho MOT-VS500SK, Руководство оператора, Страница: 34 / 62

30
4
Operation
4.8 Bending the back plate
WARNING
Keep your hands away from the following gaps during the operation of the table.
Otherwise you may get injured.
• Gap between the back plate and waist plate
• Gap between the back plate gear and rack
Back plate
Waist plate
Back plate gear
Rack
„ „
Moving up the back plate
1.
Hold down and press .
The back plate moves up.
90°
„ „
Moving down the back plate
1.
Hold down and press .
The back plate moves down.
40°
NOTE
• The maximum angle
achieved in the back plate
up position is 90° to the
level position.
• The maximum angle
achieved in the back plate
down position is 40° to the
level position.
• When the back plate is tilted
in the opposite direction from
the current tilted back plate
position, the tilting operation
stops in the level position.
Once it stops, release the
switch and press it once
again; it will be tilted to the
maximum angle.
• When the tabletop center
point is slid in the foot
direction beyond the
standard center position,
the back plate does not
move down beyond the
level position and the
buzzer will sound. If the
tabletop center point is
slid in the head direction
beyond the standard center
position, the back plate will
move down.
• The back plate will not
move up to 45° or higher
to the level position when
the lift-up unit is up, and a
buzzer will sound.
45°
Back plate
Lift-up unit