Figure 1
Figure 2
Figure 3
1 Begin by opening all boxes and sort parts Slide the eight
.
.
Dove Blocks
3 into the slots in the End Cabinet Panels
1 and
#
#
(
).
the Side Cabinet P
2 See Figure 1
anels
#
IMPORTANT
Do Not drive Dove Blocks into grooves with
!
IMPORTANT
Do Not drive Dove Blocks into grooves with
!
.
,
.
a hammer If a block is too tight try it in a different groove
.
,
.
a hammer If a block is too tight try it in a different groove
2 Attach End Cabinet Panels
1 and Side Cabinet Panels
2
.
#
#
#
#
,
,
with
Corner Posts 4 as shown in Figure 2 using four screws
#
.
:
5 for each Corner Posts
Note Bottom of Corner Posts
#
.
should be flush with bottom of Cabinet Panels
3 Set a Leg Block 6 in the corner of cabinet assembly on top
.
#
#
4 Attach Leg Bloock 6 to Dove Blocks 3 using four screws 7
See Figure 3
.
.
.
#
#
#
5 Repeat steps 3 and 4 for other three Leg Blocks 6
.
.
#
of Dove Blocks 3 See Figure 3 Attach Leg Block 6 to side
.
.
#
#
Cabinet Panel
2 and End Cabinet Panel
1 using two
#
#
screws 7
#
Page
3
