User manual
Product Specification
Power Output:
2.5W
Speaker:
51mm
Frequency Response:
100-20,000 Hz
SNR:
>89dB
Size:
110mm x 120mm x 95mm
Charging Time:
4 hours
Playing Time:
6.5 hours
Warning
- This speaker contains a lithium battery. It must be used and charged correctly
- Improper use of this speaker may cause the battery to catch fire or explode resulting in
serious or fatal injury
- The battery shall not be exposed to excessive heat such as sunshine, fire or suchlike
Caution
- Do not disassemble or modify the speaker
- Do not plave the speaker in direct sunlight, near fires, stoves or other high temperatures
- Do not expose the speaker to water, salt water or allow the speaker to get wet
- If you dispose of the speaker, remember it contains a lithium battery and recycle
accordingly
Correct disposal of this product
This marking indicates that this product should not be disposed of with
other household wastes throught the EU.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used devices, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmentally
safe recycling.
For Support, please contact Mixx Audio
via the website at www.mixx-audio.com
or email support at: [email protected]
3
Mixx S3 User Manual v1.indd 1-5
30/06/2016 23:03
Listening to Music
1. Check if the Bluetooth Status LED is flashing (ready to pair) or continuously
lit (paired and connected to a phone / music player). To enter pairing mode
simultaneously press and hold the ‘Up’ and ‘Down’ buttons.
2. To pair your phone with the Mixx S3, go to your bluetooth settings and
search for ‘Mixx S3’ then pair with the speaker (you may need to consult
your phone / music players instruction manual for specific pairing
instructions). Once pairing has completed, the Bluetooth Status LED will
be lit continuously
3. Select music to play on your phone. Adjust the volume on your phone
to maximum, then use the ‘UP’/’Down’ buttons on the rear panel of the
speaker to adjust the volume to the desired listening level.
4. To listen to music via the AUX in socket, use a 3.5mm audio cable (not
included) to connect the speaker to your music source. The Bluetooth
Status LED will illuminate GREEN to indicate it is in AUX In mode, and
the Auxilliary input will automatically be selected for audio playback.
Answering Calls
Should you receive a phone call whilst using the Mixx S3 with
Bluetooth, you can answer it and talk hands free using the
built in microphone on the front of the Mixx S3. Answer the
call from the screen on your phone and select ‘Mixx S3’ as the
speaker for the call.
Note:
The background noise may increase when the battery
charge level is low. Some audio devices such as laptops
may generate increased noise at higher volumes.
Charging the S3
When the Mixx S3 displays ‘LO’ on the clock this indicates that it
is time to charge the internal battery. Use the supplied USB cable
and power adapter to charge the battery from the nearest
convenient wall outlet. The Charge Status LED will illuminate Orange
whilst charging, and Green when fully charged.
User manual
Product Specification
Power Output:
2.5W
Speaker:
51mm
Frequency Response:
100-20,000 Hz
SNR:
>89dB
Size:
110mm x 120mm x 95mm
Charging Time:
4 hours
Playing Time:
6.5 hours
Warning
- This speaker contains a lithium battery. It must be used and charged correctly
- Improper use of this speaker may cause the battery to catch fire or explode resulting in
serious or fatal injury
- The battery shall not be exposed to excessive heat such as sunshine, fire or suchlike
Caution
- Do not disassemble or modify the speaker
- Do not plave the speaker in direct sunlight, near fires, stoves or other high temperatures
- Do not expose the speaker to water, salt water or allow the speaker to get wet
- If you dispose of the speaker, remember it contains a lithium battery and recycle
accordingly
Correct disposal of this product
This marking indicates that this product should not be disposed of with
other household wastes throught the EU.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used devices, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmentally
safe recycling.
For Support, please contact Mixx Audio
via the website at www.mixx-audio.com
or email support at: [email protected]
3
Mixx S3 User Manual v1.indd 1-5
30/06/2016 23:03
Listening to Music
1.Check if the Bluetooth Status LED is flashing (ready to pair) or continuously
lit (paired and connected to a phone / music player). To enter pairing mode
simultaneously press and hold the ‘Up’ and ‘Down’ buttons.
2.To pair your phone with the Mixx S3, go to your bluetooth settings and
search for ‘Mixx S3’ then pair with the speaker (you may need to consult
your phone / music players instruction manual for specific pairing
instructions). Once pairing has completed, the Bluetooth Status LED will
be lit continuously
3.Select music to play on your phone. Adjust the volume on your phone
to maximum, then use the ‘UP’/’Down’ buttons on the rear panel of the
speaker to adjust the volume to the desired listening level.
4.To listen to music via the AUX in socket, use a 3.5mm audio cable (not
included) to connect the speaker to your music source. The Bluetooth
Status LED will illuminate GREEN to indicate it is in AUX In mode, and
the Auxilliary input will automatically be selected for audio playback.
Answering Calls
Should you receive a phone call whilst using the Mixx S3 with
Bluetooth, you can answer it and talk hands free using the
built in microphone on the front of the Mixx S3. Answer the
call from the screen on your phone and select ‘Mixx S3’ as the
speaker for the call.
Note:
The background noise may increase when the battery
charge level is low. Some audio devices such as laptops
may generate increased noise at higher volumes.
Charging the S3
When the Mixx S3 displays ‘LO’ on the clock this indicates that it
is time to charge the internal battery. Use the supplied USB cable
and power adapter to charge the battery from the nearest
convenient wall outlet. The Charge Status LED will illuminate Orange
whilst charging, and Green when fully charged.
User manual
Product Specification
Power Output:
2.5W
Speaker:
51mm
Frequency Response:
100-20,000 Hz
SNR:
>89dB
Size:
110mm x 120mm x 95mm
Charging Time:
4 hours
Playing Time:
6.5 hours
Warning
- This speaker contains a lithium battery. It must be used and charged correctly
- Improper use of this speaker may cause the battery to catch fire or explode resulting in
serious or fatal injury
- The battery shall not be exposed to excessive heat such as sunshine, fire or suchlike
Caution
- Do not disassemble or modify the speaker
- Do not plave the speaker in direct sunlight, near fires, stoves or other high temperatures
- Do not expose the speaker to water, salt water or allow the speaker to get wet
- If you dispose of the speaker, remember it contains a lithium battery and recycle
accordingly
Correct disposal of this product
This marking indicates that this product should not be disposed of with
other household wastes throught the EU.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used devices, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmentally
safe recycling.
For Support, please contact Mixx Audio
via the website at www.mixx-audio.com
or email support at: [email protected]
3
Mixx S3 User Manual v1.indd 1-5
30/06/2016 23:03
Listening to Music
1. Check if the Bluetooth Status LED is flashing (ready to pair) or continuously
lit (paired and connected to a phone / music player). To enter pairing mode
simultaneously press and hold the ‘Up’ and ‘Down’ buttons.
2. To pair your phone with the Mixx S3, go to your bluetooth settings and
search for ‘Mixx S3’ then pair with the speaker (you may need to consult
your phone / music players instruction manual for specific pairing
instructions). Once pairing has completed, the Bluetooth Status LED will
be lit continuously
3. Select music to play on your phone. Adjust the volume on your phone
to maximum, then use the ‘UP’/’Down’ buttons on the rear panel of the
speaker to adjust the volume to the desired listening level.
4. To listen to music via the AUX in socket, use a 3.5mm audio cable (not
included) to connect the speaker to your music source. The Bluetooth
Status LED will illuminate GREEN to indicate it is in AUX In mode, and
the Auxilliary input will automatically be selected for audio playback.
Answering Calls
Should you receive a phone call whilst using the Mixx S3 with
Bluetooth, you can answer it and talk hands free using the
built in microphone on the front of the Mixx S3. Answer the
call from the screen on your phone and select ‘Mixx S3’ as the
speaker for the call.
Note:
The background noise may increase when the battery
charge level is low. Some audio devices such as laptops
may generate increased noise at higher volumes.
Charging the S3
When the Mixx S3 displays ‘LO’ on the clock this indicates that it
is time to charge the internal battery. Use the supplied USB cable
and power adapter to charge the battery from the nearest
convenient wall outlet. The Charge Status LED will illuminate Orange
whilst charging, and Green when fully charged.
User manual
Product Specification
Power Output:
2.5W
Speaker:
51mm
Frequency Response:
100-20,000 Hz
SNR:
>89dB
Size:
110mm x 120mm x 95mm
Charging Time:
4 hours
Playing Time:
6.5 hours
Warning
- This speaker contains a lithium battery. It must be used and charged correctly
- Improper use of this speaker may cause the battery to catch fire or explode resulting in
serious or fatal injury
- The battery shall not be exposed to excessive heat such as sunshine, fire or suchlike
Caution
- Do not disassemble or modify the speaker
- Do not plave the speaker in direct sunlight, near fires, stoves or other high temperatures
- Do not expose the speaker to water, salt water or allow the speaker to get wet
- If you dispose of the speaker, remember it contains a lithium battery and recycle
accordingly
Correct disposal of this product
This marking indicates that this product should not be disposed of with
other household wastes throught the EU.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used devices, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmentally
safe recycling.
For Support, please contact Mixx Audio
via the website at www.mixx-audio.com
or email support at: [email protected]
3
Mixx S3 User Manual v1.indd 1-5
30/06/2016 23:03
Listening to Music
1. Check if the Bluetooth Status LED is flashing (ready to pair) or continuously
lit (paired and connected to a phone / music player). To enter pairing mode
simultaneously press and hold the ‘Up’ and ‘Down’ buttons.
2. To pair your phone with the Mixx S3, go to your bluetooth settings and
search for ‘Mixx S3’ then pair with the speaker (you may need to consult
your phone / music players instruction manual for specific pairing
instructions). Once pairing has completed, the Bluetooth Status LED will
be lit continuously
3. Select music to play on your phone. Adjust the volume on your phone
to maximum, then use the ‘UP’/’Down’ buttons on the rear panel of the
speaker to adjust the volume to the desired listening level.
4. To listen to music via the AUX in socket, use a 3.5mm audio cable (not
included) to connect the speaker to your music source. The Bluetooth
Status LED will illuminate GREEN to indicate it is in AUX In mode, and
the Auxilliary input will automatically be selected for audio playback.
Answering Calls
Should you receive a phone call whilst using the Mixx S3 with
Bluetooth, you can answer it and talk hands free using the
built in microphone on the front of the Mixx S3. Answer the
call from the screen on your phone and select ‘Mixx S3’ as the
speaker for the call.
Note:
The background noise may increase when the battery
charge level is low. Some audio devices such as laptops
may generate increased noise at higher volumes.
Charging the S3
When the Mixx S3 displays ‘LO’ on the clock this indicates that it
is time to charge the internal battery. Use the supplied USB cable
and power adapter to charge the battery from the nearest
convenient wall outlet. The Charge Status LED will illuminate Orange
whilst charging, and Green when fully charged.
User manual
Product Specification
Power Output:
2.5W
Speaker:
51mm
Frequency Response:
100-20,000 Hz
SNR:
>89dB
Size:
110mm x 120mm x 95mm
Charging Time:
4 hours
Playing Time:
6.5 hours
Warning
- This speaker contains a lithium battery. It must be used and charged correctly
- Improper use of this speaker may cause the battery to catch fire or explode resulting in
serious or fatal injury
- The battery shall not be exposed to excessive heat such as sunshine, fire or suchlike
Caution
- Do not disassemble or modify the speaker
- Do not plave the speaker in direct sunlight, near fires, stoves or other high temperatures
- Do not expose the speaker to water, salt water or allow the speaker to get wet
- If you dispose of the speaker, remember it contains a lithium battery and recycle
accordingly
Correct disposal of this product
This marking indicates that this product should not be disposed of with
other household wastes throught the EU.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used devices, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmentally
safe recycling.
For Support, please contact Mixx Audio
via the website at www.mixx-audio.com
or email support at: [email protected]
3
Mixx S3 User Manual v1.indd 1-5
30/06/2016 23:03
Listening to Music
1.Check if the Bluetooth Status LED is flashing (ready to pair) or continuously
lit (paired and connected to a phone / music player). To enter pairing mode
simultaneously press and hold the ‘Up’ and ‘Down’ buttons.
2.To pair your phone with the Mixx S3, go to your bluetooth settings and
search for ‘Mixx S3’ then pair with the speaker (you may need to consult
your phone / music players instruction manual for specific pairing
instructions). Once pairing has completed, the Bluetooth Status LED will
be lit continuously
3.Select music to play on your phone. Adjust the volume on your phone
to maximum, then use the ‘UP’/’Down’ buttons on the rear panel of the
speaker to adjust the volume to the desired listening level.
4.To listen to music via the AUX in socket, use a 3.5mm audio cable (not
included) to connect the speaker to your music source. The Bluetooth
Status LED will illuminate GREEN to indicate it is in AUX In mode, and
the Auxilliary input will automatically be selected for audio playback.
Answering Calls
Should you receive a phone call whilst using the Mixx S3 with
Bluetooth, you can answer it and talk hands free using the
built in microphone on the front of the Mixx S3. Answer the
call from the screen on your phone and select ‘Mixx S3’ as the
speaker for the call.
Note:
The background noise may increase when the battery
charge level is low. Some audio devices such as laptops
may generate increased noise at higher volumes.
Charging the S3
When the Mixx S3 displays ‘LO’ on the clock this indicates that it
is time to charge the internal battery. Use the supplied USB cable
and power adapter to charge the battery from the nearest
convenient wall outlet. The Charge Status LED will illuminate Orange
whilst charging, and Green when fully charged.
NekFit Sports
