6
4. Wire the Mixergy controller’s immersion supply cable into the
terminals MXL(L), MXN(N), GND(E) on the PV switch. This
cable can be extended using minimum 1.5mm
2
CSA 3-core
H05V2V2-F flex if required.
5. Wire the external diverter’s immersion supply cable into the ter-
minals PVL(L), PVN(N), GND(E) on the PV switch.
6. Wire an appropriate length of minimum 1.5mm
2
CSA 3-core
H05V2V2-F flex from the PV switch terminals IML(L), IMN(N),
GND(E) to the cylinder’s primary immersion heater terminals L,
N, E.
Installation: electrical
