Mixcder ShareMe Pro, Руководство пользователя

Страница: 9 / 80

EN-8
Note:
- ShareMe Pro will pair with the last paired device automati-
cally when turned on. But for some computers or laptops you
will need to manually pair every time.
- There will be a alert tone when the volume reaches the
minimum or maximum level.
- The microphone can't work when using a wired headphone.
The “*” is available to the primary headphone with enabled ShareMe
function.
11. Troubleshooting
Q: The headphone cannot be turned on.
A: The battery may be flat. Please recharge the battery and try
again. Refer to chapter 4. Charging the Battery.
Q: Why doesn’t the headphone pair with the mobile phone?
A: Please check the followings.
- Check that the headphone is charged and is in pairing mode.
- Make sure that the mobile phone's wireless function is on.
- Make sure the two devices are in the effective pairing range.
(10 meters). If use ShareMe function, make sure two
headphones are within 5 meters.
- Make sure that there is no obstacle between the headphone
and the mobile phone, such as electronic equipment and a
wall.
- Furthermore, you can try restarting the headphone and
pairing it with the mobile phone again.
Q: There is some noise.
A: Wireless is a radio technology, so it is sensitive to obstacles
between the headphone and the pairing device. Please make
sure that there is no obstacle between the two devices and is
Answer a call*
The LED flashes red twice every second and
press the power button to answer the call. Then
the LED flashes blue twice every second.
Reject a call* Press and hold the power button for 2 seconds
End a call* Press the power button
Redial the last number* Press and hold the power button for 2 seconds