9
After mounting KUBE IPC, make any necessary cable connections.
The available connectors are:
Ethernet (ETH): Two RJ45 connectors allow the computer to communicate on a
10/100/1000 Base-T Ethernet network.
Serial (COM): Three D-SUB 9 serial ports are available for use. Two ports are set
as RS-232 while one port is configurable as either RS-232, RS-422, or RS-485.
USB (USB): USB devices connect using Type-A connectors. Two ports are USB 2.0
and two are USB 3.0 ports
DisplayPort (DP): These ports connect the KUBE IPC to external digital displays
with a corresponding DisplayPort connector. If needed, you also can use Video
adaptor to other video interface, like DVI, HDMI…etc.
Mini PCIe: This internal slot allows installation of a mini PCIe card (see “Mass
storage” )
2.3.2
Power connection
A three-position, screw-type connector is provided for connecting power to the KUBE
3000/5000 series IPC.
Connect a power source to the included power connector. This connector supports
wire sizes from 0.2 to 2.5 mm² (24 to 12 AWG). Torque the wire-retaining screws in the
connector to 0.5 Nm (4.4 lbf-in.). Secure the connector to the KUBE IPC chassis.
USB 3.0 ports utilize a blue connector. USB 2.0 ports are black.
