Mitsubishi SEZ-KD71VAQ, Руководство по эксплуатации

Страница: 4 / 196

4
2. Parts Names
Note:
●
The day and time will not appear if clock use has been disabled at Function
Selection of remote controller.
●
After the power supply returns, the indoor unit does not operate for three
minutes. Above operation is normal.
3. Screen Configuration
■
Outdoor unit
<Screen Types>
For details on setting the language for the remote controller display, refer
to section 8. Function Selection.
The initial language setting is English.
●
Function Selection of remote controller:
Set the functions and ranges available to the re-
mote controller (timer functions, operating restric-
tions, etc.)
●
Set Day/Time: Set the current day of the week or time.
●
Standard Control Screens:
View and set the air conditioning system’s oper-
ating status
●
Timer Monitor: View the currently set timer (weekly timer, sim-
ple timer, or Auto Off timer)
●
Timer Setup: Set the operation of any of the timers (weekly
timer, simple timer, or Auto Off timer).
<How to change the screen>
A
: Hold down both the Mode button and the Timer On/Off button for 2
seconds.
B
:Press the Timer Menu button.
C
:Press the Mode (Return) button.
D
:Press either of the Set Time buttons ( or ).
˚F ˚C
TIMER
MON
OFF
WEEKLY
SUN MON TUE WED THU FRI SAT
WEEKLY
˚F ˚C
˚C
TIME SUN
Function Selection of remote controller
Set Day/Time
Standard Control Screens
OFF ON
Timer Monitor Timer Setup
A D C
B C
B
1. Press the or Set Time button A to show display 2 .
2. Press the Timer On/Off (Set Day) button 9 to set the day.
* Each press advances the day shown at 3 : Sun
→
Mon
→
...
→
Fri
→
Sat.
3. Press the appropriate Set Time button A as necessary to set the time.
* As you hold the button down, the time (at 4 ) will increment first in
minute intervals, then in ten-minute intervals, and then in one-hour in-
tervals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button 4 to lock in the values.
Note:
●
Your new entries at Steps 2 and 3 will be cancelled if you press the Mode
(Return) button
2 2 2 2 2
before pressing the Filter button
4 4 4 4 4
.
5. Press the Mode (Return) button
2
to complete the setting procedure.
This will return the display to the standard control screen, where
1
will
now show the newly set day and time.
4. Setting the Day of the Week and Time
Day of the Week &
Time display
˚C
˚C
TIME SUN
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK DAY MONITOR/SET
CLOCK
ON/OFF 2 4
9
1
A
Time Setting
TIME SUN
2
3
4
Day of the Week Setting
Power
Earth
Indoor-Outdoor
Connection wire
Ref. Pipes
GB.pm6 2010.10.12, 14:20 4