Mitsubishi S6S, Руководство по обслуживанию, Страница: 10 / 33

1-4
GENERAL
Model designation S6S
Refill capacity (engine water jacket)
9.0 (2.4)
liter (U.S. gal.)
Type Centrifugal
Water pump
Speed ration to crankshaft 1.3
Capacity 160 (42.3) at 0.07 MPa (7.5 kgf/cm 2 ) [107 psi]
liter (U.S gal.)/min/min -1 discharge pressure of pump running at 3600 min -1
Belt Type mm (in.) Low-edge B type V-belt
×
1 1190 (46.9)
Type Wax pellet
Thermostat Valve opening temperature
76.5±1.5 (170±2.7)
°C (°F)
Type Bosch A
Diameter of plunger
7 (0.276)
Injection pump mm (in.)
Cam lobe lift
8 (0.315)
mm (in.)
Governor Type Bosch RSV, centrifugal
Type of nozzle Bosch hole
No. of discharge orifice 1
Diameter of discharge
1.0 (0.039)
Injection nozzle
orifice mm (in.)
Spray cone angle 0°
Valve opening pressure
11.77 (120) [1707]
MPa (kgf/cm 2 ) [psi]
Fuel filter Type Cartridge of paper element
Voltage – polarity 24 V – (
−
) ground
Model M008T60372
Type Pinion shift
Starter Output V – kW 24 – 5
No. of pinion teeth/
10/122
flywheel ring gear teeth
Type 3-phase, with rectifier
Output V – A 24 – 35
Working speed min -1 8000
Alternator
Rated output generating
5000
speed min -1
Maximum permissible
10,000
speed min -1
Speed ratio to crankshaft 2.0
Type Electric
Glow plug
Rated voltage – current
22 – 4.4 (1.5 sec rating)
V – A
Stop solenoid Rated voltage V 24
Electrical
system
Cooling system
Fuel system