3-10
Chapter 3 OPERATION
Coolant Level - Check
If the coolant level is low, add coolant to the specified level.
Note: Determine the quantities of LLC based on the coolant capacity and the LLC concentration chart.
For the coolant, refer to
. For the coolant capacity, refer to
Air Cleaner - Check for Clogging
1.
Check the air cleaner indicator for the element
clogging.
2.
If the element is clogged, the red signal mark will
be displayed.
3.
Immediately clean or replace the air cleaner ele-
ment when the signal turns red.
4.
After checking, press the bottom on top of the indi-
cator to re-set the alarm signal.
Note: (a) For cleaning of the air cleaner element, refer
to
"Air Cleaner Element - Clean, Check and
(b) If the specification of air cleaner differs from
the contents of this operation manual, follow
the manufacturer's operation manual.
Fig. 3-14 Air Cleaner - Check for Clogging
Always use the coolant having the same concentration.
Reset
button
Signal
(red)
