49
OPERATING PROCEDURE
PHOTOS
8. Removing the line flow fan and the fan motor
(1) Remove the left and right side panels.
(2) Remove the grilles.
(3) Remove the electrical parts box.
(4) Remove the drain pan.
(5) Loosen the screw that fixes the line flow fan to the fan
motor. (See Photo 7. )
(6) Remove the 4 screws of the motor fixture, and remove the
fan motor and the motor fixture at a time (See Photo 8.)
(7) Remove the screws of the left and right motor supports,
and remove the motor supports and the fan motor. (See
Photo 9.)
(8) Remove the 2 screws on the left and right sides of the heat
exchanger, and pull the bearing support toward you. (See
Photo 11.)
(9) Remove the screw of the centre support, and remove the
support. (See Photo 10. )
Pull the left-hand side of the heat exchanger toward you,
and remove the line flow fan.
Photo 10
Screw
Centre support
Line flow fans
Photo 9
Photo 11
Photo 8
Photo 7
Screw
Motor
support
Motor support
Screw
Fan motor
Motor fixture
Fan motor
Screws
Screw
Fan motor
Line flow fan
Lineflow fan
Bearing support
(10)
OC301B--2.qxp 13.8.20 3:22 PM Page 49
OC301B
