- 44 -
2
2
2
2
2
-7.2. Wiring and fitting capacities
<PUH>
Main power supply wire thickness and switch capacities.
PUH-7, 8
PUH-10
Power supply thickness *1
mm
2
8 or more
14 or more
Overcurrent protector *2
A
50
60
Power supply thickness *1
mm
2
2.0
Overcurrent protector *2
A
15
mm
2
0.8 or more *3
mm
2
1.5 or more
mm
2
8 or more
14 or more
Notes:
*1: “Power supply thickness” indicates the thinnest allowable metal wire.
*2: “Overcurrent protector” indications are for when class B fuse are used.
*3: These wires are supplied with optional remote controller and branch pip-
ing.
*4: Power supply codes of parts of appliances for outdoor use shall not be
lighter than polychloroprene sheathed flexible cord (design 245 IEC 57).
*5: A switch with at least 3 mm contact separation in each pole shall be
provided by the Air conditioner installation.
Table above is an example. The selection of other capacities should be deter-
mined in accordance with the relevant standards.
Types of cable/cord
•
Vinyl cab tire round cord: VCTF
•
Vinyl insulating vinyl sheath cable round type: VVR
•
Vinyl cab tire flat cord: VCTFK
•
Vinyl insulating vinyl sheath cable flat type: VVF
•
Vinyl insulating vinyl sheath cable for control: CVV
•
600 V vinyl cab tire cable: VCT
•
Vinyl insulating vinyl sheath cable for control: CVS
Warning:
Be sure to use specified cables and connect them firmly so that no external
wiring force is exerted on terminal connections. Loose connections may cause
heat or fire.
Caution:
•
Some installation sites may required installation of an earth leakage
breaker. Failure to install it may result in an electric shock.
•
Always use an earth leakage breaker and fuse with the specified capac-
ity. Use of a fuse with a capacity larger than that specified, or use of a
piece of wire or copper wire may cause breakdown or fire.
Example
Connecting with PEH-MYB
Thickness of wires for remote control-
ler and indoor unit *3
Thickness of wire between indoor and
outdoor unit
Ground wire thickness
Electr
ical work
Main wire
Indoor
Unit
Outdoor
Unit
A
Power supply
B
Breaker
C
Switch box
D
Remote controller
[Fig.
2
2
2
2
2
-7.2.1]
PEH-7,8
L1 L2 L3 N
L
1 L2 L3 N
S1 S2 S3
S1 S2 S3
PUH-7,8
PEH-10
L1 L2 L3 N
L
1 L2 L3 N
S1 S2 S3
S1 S2 S3
PUH-10
A
B C
C B A
C B A
D
D
A
B C
PE
PE
PE
PE
