For Right-hand Drive Vehicle
Connection of Camera Cable Terminals
Joint Surface
Joint Surface Side View
Red
White
Blue Transparent Black 24P Connector
(1) Disconnect a 24P connector from the
navigation.
Caution
Be careful not to connect terminals
mistakenly.
It may cause malfunction.
①
Disengage stoppers on the 24P connector.
②
Insert camera cable terminals into the 24P
connector as shown in left-hand illustration.
③
Engage the stoppers.
A Arrow View
Red
White
Blue Transparent Black
Terminal Surface
ACC (Red)
VRV (White)
R-EX (Blue)
SB (Transparent)
GND (Black)
Camera Cables
Disengage stoppers by pressing
claws on both sides.
Engage stoppers.
(2) Connect the connector side of the 24P
connector to MMCS.
Connect 24P connector.
Note: Illustration of RHD is provided here
as an example.
24P Connector
