21
12
DISASSEMBLY INSTRUCTIONS
(1) Slide the sleeve and check if there is a locking lever or not.
(2) The terminal with this connector is a terminal
with lock mechanism
1
Slide the sleeve.
2
Pull the terminal while
pushing the locking
lever.
1
Hold the sleeve, and
pull out the terminal
slowly.
In case of terminal with lock mechanism, detach the terminal as shown below.
There are two types ( Refer to (1) and (2)) of the terminal with lock mechanism.
The terminal with no lock mechanism can be removed by pulling it out.
Check the shape of the terminal and work.
<"Terminal with lock mechanism" Detaching points>
Connector
Sleeve
Locking lever
12-1. MUX-A22WV -
OUTDOOR UNIT
E1
OPERATING PROCEDURE
PHOTOS
1.Removing the cabinet
(1) Remove the screws of the top panel.
(2) Remove the screws of the service panel.
(3) Remove the top panel.
(4) Remove the service panel.
(5) Remove the screws of the front panel.
(6) Remove the front panel.
(7) Remove the screws of the back panel.
(8) Remove the back panel.
Photo 2
Photo 1
Photo 3
Top panel
Front
panel
Set screws
of the front panel
Set screws
of the front
panel
Set screws
of the top panel
Service panel
Set screws
of the ser-
vice panel
Set screws
of the back
panel
Back panel
Set screws of the
back panel
Set screws
of the front panel
OB318--1.qxp 03.10.30 0:55 PM Page 21
