38
Problem
Check
Explanation and Action
There are lines
There are lines
like scratches on
like scratches on
the clear parts
the clear parts
1
1
Is it a thin line without level difference
on its both sides?
This is a mark created at the time the plastic is molded. It is
created at the joint where resin fl ows. This is not a fl aw.
There are holes
There are holes
in the door and
in the door and
the refrigerator
the refrigerator
walls
walls
1
1
Are there small holes in the door or in
the refrigerator walls?
These are holes that let air escape for the injection of foam
heat insulating materials in the manufacturing process.
These are not fl aws or abnormalities.
The surface of
The surface of
the sides or
the sides or
doors is warped
doors is warped
1
1
Does the light refl ected on the surface
appear distorted?
Warping and surface waviness occurs in the manufacturing
process. When light hits the surface, it may appear warped,
but this is not an abnormality.
Noise interferes
Noise interferes
with
with
televisions or
televisions or
other devices
other devices
1
1
Is the refrigerator installed near an
electronic device such as a television?
Install the refrigerator away from electronic devices such as
televisions.
2
2
Is the power to the refrigerator
supplied from a socket near the entry
hole of the antenna cable?
Use separate power. When using a 2 pin plug, use
grounding.
There is a
There is a
bothersome
bothersome
smell (Food / Ice)
smell (Food / Ice)
1
1
Have you placed food with strong odor
inside the refrigerator without sealing it
in a container?
Store food with strong odor in packaging.
The odor may not be removed with a deodorizing apparatus.
2
2
Do you periodically clean the water
tank?
Clean periodically.
Pages 26 - 27
Other
s
Troubleshooting
Troubleshooting
(Continued)
(Continued)