29
When attaching parts, use the backward procedures of removal.
1
Remove the glass shelf (lower) and place it on
a surface such as a stand.
2
Press the glass shelf (lower) down with one
hand.
* The shelves are fi rmly installed.
3
Pull in the direction indicated by the arrow.
1
Fully pull out the lower case.
2
Lift the lower case out to the front.
1
Lift the upper case cover.
2
Press the position indicated with
on the right and
remove.
3
Fully pull out the upper case and lift the front of the
upper case until the bottom can be seen.
1
4
While tilting the upper case to your side, pull it out.
* When it is diffi cult to remove, remove the upper case
after removing the adjustable pocket.
Bottom
Bottom
position
2
1
3
4
2
3
2
1
Be careful when attaching and
removing the glass shelf.
If it is attached improperly, it could
come loose and fall, causing injury.
Follow the
instructions
wer) and place it on
down with one
alled.
d by the arrow.
Glass Shelf (Upper) (Middle) (Lower)
1
Lift the front of the shelf using both hands.
2
Pull out to the front.
3
Using the gap between the refrigerator compartment
and door, rotate the glass shelf (upper) and remove
from the refrigerator.
*
The illustration is of the glass shelf (upper). Remove the
glass shelves (middle) and (lower) in the same manner.
*
Remove the glass shelf (lower), with the partition
attached, after you have removed the glass shelf
(middle) and slide glass shelf.
Partition
Lower Case
Upper Case /
Upper Case Cover
1
Remove the slide glass shelf (front) using the
protruding parts in the front and back along with the
grooved parts.
Protruding Part
Grooved Part
2
Pull the slide glass shelf (back) out to the front
while holding the front with both hands.
Slide Glass Shelf (Front) (Back)
1
2
1
2
Cleaning