Mitsubishi MELFA RV-2SD Series, Стандартные технические условия

Страница: 11 / 150

1General configuration
Model type name of robot 1-2
1.2 Model type name of robot
1.2.1 How to identify the robot model
RV-2SD B -Sxx
( ａ ) ( ｂ ) (c )
(a).
Ｒ Ｖ - ２ Ｓ Ｄ ....................... Indicates the RV-2SD series
(b).
B ................................................. Indicates the existence of the brake.
Examples)
Blank: J1,J4,J6 axis has no brake.
B: All axes have the brake.
(c).
-Ｓ ｘ ｘ ..................................Indicates a special model number. In order, limit special specification.
1.2.2 Combination of the robot arm and the controller
Table 1-1 ： Combination of the robot arm and the controller
1.3 CE marking specifications
The robot of the CE Marking specification is prepared. (Special model number: S15/S16)
As compared with standard specification, there are mainly the following differences. Existence of all the axes
brakes, the controller's outside dimension, machine-cable.
The type name of the CE Marking specification etc. is shown in Table 1-2 . Interpret the description of these
type names in this volume as the CE Marking specification.
Table 1-2 ： Robot models with CE marking specifications
(Note) The main differences between S15 and S16 are the shape of the machine cable connector. (Refer to Page
23, "(1) Machine cable extension" )
1.4 Indirect export
The display in English is available by setting parameter LNG as "ENG."
1.5 Instruction manuals
The instruction manuals supplied in CD-ROM, except for the Safety Manual. This CD-ROM (electronic manual)
includes instruction manuals in both Japanese and English versions.
Protection specification Robot arm Axial constitution Controller
Standard specification
RV-2SD/2SDB 6-axis type CR1DA-771
Robot type
Controller
External signal logic Language setting
6 axis-type RV-2SDB-S15 CR1DA-771-S15
Source type English (ENG)
RV-2SD-S16 CR1DA-771-S16