the next axis.
Perform step
for each of the axes involved.
Keep the
setting plug inserted for the head axis only;
remove the plugs for all other axes.
How to insert the TRA-1 and DUA-1 cables
Notes:
outside.
Setting plugs and the adjustable variable resistors
are located on the control card and they should be adjusted
when the unit is replaced.
When check pins CHA,
CHB,
and
are observed using
a synchroscope,
do not connect the other check pins and
ground simultaneously.
Ensurethatproper connection is made to P and N of
the
transistor amplifier, and be sure to connect only after
confirming that there is no faulty or improper wiring.
When the control loop is a closed loop, the ZP2 cable need
not be connected.
