background image

20

)

DW START

END

HR

1 SPL 08 : 40 17 : 10

L12SP

- - - - - : - -

- - : - -

- - -

)

DW START

END

HR

1 SPL 08 : 40 17 : 10

L12SP

SAT - - : - -

- - : - -

- - -

)

DW START

END

HR

1 SPL 08 : 40 17 : 10

L12SP

SAT - - : - -

- - : - -

- - -

)

DW START

END

HR

1 SPL 08 : 40 17 : 10

L12SP

SAT 08 : 00

- - : - -

- - -

)

DW START

END

HR

1 SPL 08 : 40 17 : 10

L12SP

SAT 08 : 00

- - : - -

- - -

)

DW START

END

HR

1 SPL 08 : 40 17 : 10

L12SP

SAT 08 : 00 12 : 00

- - -

)

DW START

END

HR

1 SPL 08 : 40 17 : 10

L12SP

SAT 08 : 00 12 : 00

- - -

)

DW START

END

HR

1 SPL 08 : 40 17 : 10

L12SP

SAT 08 : 00 12 : 00

72SP

<

TIMER PROGRAM 

>

)

DW START

END

HR

SPL 08 : 40 17 : 10

L12SP

2 - - - - - : - -

- - : - -

- - -

TIMER RECORDING

<MAIN MENU>
  DISPLAY
  TIME DATE SEARCH
  TIMER PROGRAM
  RECORDING SET UP
  REAR TERMINAL
  MAINTENANCE
  FIRST TIME SET UP
Use JOG to select, 
and ENTER.
Press DISPLAY to exit.

• “DAY” (in “Day of the week”) is used for the same

time recording everyday.

• “SPL” (special) (in “Day of the week”) indicates that

the recording period set in “TIMER PROGRAM”
display becomes available.

• “SKIP” (in “HR”) indicates that timer recording is not

performed during the set period.

• A 24-hour display is used.  00:00 indicates midnight;

12:00 midday and 15:00 3 o’clock in the afternoon.

• If the recording times of two programs overlap, the

higher program number is given priority.

• In 3H, L12H or L24H mode, audio is also recorded.

1

 Press the DISPLAY button to display the MAIN MENU on the monitor.

2

Turn the JOG dial to select “TIMER PROGRAM” and turn the SHUTTLE ring to the right.

“TIMER PROGRAM” display will appear.

3

Turn the JOG dial to select the program number and turn the SHUTTLE ring to the right.

The day of the week display flashes.

4

Setting the day of the week (DW).
Turn the JOG dial to set the day of the week and turn the SHUTTLE ring to the right.

5

Setting the recording start time (START).
Turn the SHUTTLE ring to select the recording start time display.
Turn the JOG dial to set the recording start time.

6

Setting the recording end time (END).
Turn the SHUTTLE ring to select the recording end time display.
Turn the JOG dial to set the recording end time.

7

Setting the recording mode (HR).
Turn the SHUTTLE ring to select the recording mode display.
Turn the JOG dial to set the recording mode.

8

Turn the SHUTTLE ring to the right.

The display stops flashing.

If the program has not been set completely, the flashing will not stop.

If the END time is the same or earlier than the START time, the next day indicator (•) is automatically displayed.
This indicates that the recording will run continuously from the START time on the first day to the END time on the next day.

When setting another program, turn the SHUTTLE ring to set and repeat steps 

3

 - 

8

.  A maximum of eight programs can be

made.

To erase the program setting, select the program number to be erased. Turn the SHUTTLE ring to the right to flash the day of the
week, then turn the SHUTTLE ring to the left.

9

Press the DISPLAY button to show the day and present time on the monitor.

A

Press the TIMER REC button.

The TIMER REC indicator is illuminated.

<TIMER PROGRAM>

DW

START

 END    HR

1

- - -

- -  : - -

- - : - -

  - - -

2

DAY 08 : 40

17 : 25 L12SP

3

MON 22 : 00

22 : 50     72SP

4

WED 22 : 00

22 : 50   96SP

5

SPL

20 : 30

23 : 30     3SP

6

MON  10 : 10

11 : 15    SKIP

7

SUN 23 : 30

00 : 15     3SP

8  MON 21 : 00

21 : 54     3SP

SPECIAL DW MON-FRI

Program
number

Day of the
week

Recording start time

Next day indicator

Recording end time

Recording mode display

)

Содержание HS-S8300E(BRS)











































Отзывы: