Mitsubishi FUSO FE 2006 Скачать руководство пользователя страница 89

Страница: 89 / 309

7-12

Starting and driving

Parking

WARNING

•

Park the vehicle on the flattest available

surface.

Avoid parking on slopes.

When you cannot avoid parking on a

slope, apply chocks to the wheels. You

can further improve safety by leaving the

steering wheel turned so the vehicle will

roll toward an obstacle (for example, a

curbstone) in the unlikely event of move-

ment.

•

Be sure to apply the parking brake fully.

•

On an automatic transmission vehicle,

never park the vehicle without applying

the parking brake. Do not rely only on set-

ting the range selector lever in the “P”

position.

If you cannot avoid parking on a slope, be

sure to apply the parking brake securely

and apply chocks to the wheels. Depend-

ing on the condition of the vehicle, the

automatic transmission’s parking mecha-

nism (“P” position) may be damaged and

released, possibly leading to a serious

accident.

•

The engine and exhaust pipe are

extremely hot immediately after the vehi-

cle has been driven. Do not park the vehi-

cle in any place where there is dry grass,

waste paper, or other flammable material.

•

Always stop the engine before sleeping in

the cabin. You could otherwise cause an

accident by unintentionally moving the

accelerator pedal or shift lever while sleep-

ing. Also, you could suffer carbon-monox-

ide poisoning from exhaust gases if the

vehicle is parked in a closed space.

•

Never leave lighters, cans of carbonated

drink, and spectacles in the cabin when

parking the vehicle in hot sunshine. The

cabin will become extremely hot, so light-

ers and other flammable items may catch

fire and unopened drink cans (including

beer cans) may rupture. The heat may also

affect plastic spectacle lenses and other

spectacle parts that are made of plastic.

For example, the coating on the lenses

may crack and the lenses themselves may

become deformed.

•

Always use the mirrors to confirm safety

before opening a door. Suddenly opening

a door is dangerous because the door may

obstruct cars, motorcycles, bicycles, and

pedestrians coming from behind.

Z11324

Z01422

FEFG.book Page 12 Thursday, March 10, 2005 7:30 PM

Содержание FUSO FE 2006






















































































































































































































































































































Результаты поиска

Содержание FUSO FE 2006

Отзывы:

Похожие инструкции для FUSO FE 2006

Бренды по названию

Популярные бренды

Mitsubishi FUSO FE 2006, Руководство пользователя

Результаты поиска

Содержание FUSO FE 2006

Отзывы:

Похожие инструкции для FUSO FE 2006

Бренды по названию

Популярные бренды