Mitsubishi ECLIPSE CROSS 2017, Руководство пользователя

Страница: 438 / 538

Tyre size Wheel size Max. snow
traction de-
vice (tyre
chains)
height [mm]
225/55R18
98H
18x7 J
When driving with a snow traction device
(tyre chains) on the tyres, do not drive faster
than 50 km/h (30 mph). When you reach
roads that are not covered in snow, immedi-
ately remove the snow traction device (tyre
chains).
CAUTION
l Choose a clear straight stretch of road where
you can pull off and still be seen while you
are fitting the snow traction device (tyre
chains).
l Do not fit snow traction device (tyre chains)
before you need them. This will wear out
your tyres and the road surface.
l After driving around for 100-300 meters,
stop and retighten the snow traction device
(tyre chains).
l Drive cautiously and do not exceed 50 km/h
(30 mph). Remember that preventing acci-
dents is not the purpose of snow traction de-
vice (tyre chains).
l When snow traction device (tyre chains) are
installed, take care that they do not damage
the disc wheel or body.
CAUTION
l
Do not install a snow traction device (tyre
chains) on an emergency wheel which is
compact in size. If one of the front wheels
has punctured, replace it with one of the rear
wheels and install the temporary spare wheel
in that place before fitting a snow traction
device (tyre chains).
l An aluminium wheel can be damaged by a
snow traction device (tyre chains) while
driving. When fitting a snow traction device
(tyre chains) on an aluminium wheel, take
care that any part of the snow traction device
(tyre chains) and fitting cannot be brought
into contact with the wheel.
l On vehicles equipped with the wheel covers,
remove the wheel covers before installing a
snow traction device (tyre chains), otherwise
they may be damaged by the snow traction
device (tyre chains). (See “Wheel covers*”
on page 8-19.)
l
When installing or removing a snow traction
device (tyre chains), take care that hands and
other parts of your body and not injured by
the sharp edges of the vehicle body.
NOTE
l The laws and regulations concerning the use
of snow traction device (tyre chains) vary.
Always follow local laws and regulations.
In most countries, it is prohibited by the law
to use of snow traction device (tyre chains)
on roads without snow.
Wiper blade rubber
replacement
E01002601630
Windscreen wiper blades
1. Lift the wiper arm off the windscreen.
2. Pull the wiper blade until its stopper (A)
disengages from the hook (B). Pull the
wiper blade further to remove it.
CAUTION
l Do not let the wiper arm drop onto the wind-
screen. This could damage the glass.
3. Attach the retainers (C) to a new wiper
blade.
Wiper blade rubber replacement
10-14
OGKE18E1
Maintenance
10