Mitsubishi E55LCD Скачать руководство пользователя страница 16

Страница: 16 / 76

1-13

English-8

•

Avoid displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after-image effects).

•

Get regular eye checkups.

Ergonomics

To realise the maximum ergonomics benefits, we recommend the following:

•

Use the preset Size and Position controls with standard signals.

•

Use the preset Colour Setting.

•

Use non-interlaced signals with a vertical refresh rate between 60-75 Hz.

•

Do not use primary colour blue on a dark background, as it is difficult to see and may produce eye fatigue due to
insufficient contrast.

Specifications

Monitor Specifications

Notes

E55LCD (NL1503)

LCD Module

Diagonal:

38 cm/15 inches

Active matrix; thin film transistor (TFT)

Viewable Image Size:

38 cm/15 inches

liquid crystal display (LCD); 0.297 mm dot

Native Resolution (Pixel Count):

1024 x 768

pitch; typical 200cd/m

white luminence;

typical 300:1 contrast ratio.

Input Signal

Video:

ANALOG 0.7 Vp-p/75 Ohms

Sync:

Separate sync.TTL Level (Positive/Negative)
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative

Display Colours

Analog input:

16,194,277 (DITHERING)

Depends on display card used.

Synchronization Range

Horizontal:

24.8 kHz to 60 kHz

Automatically

Vertical:

50 Hz to 75.1 Hz

Automatically

Viewing Angle

Left/Right:

±60

Up/Down:

±45

Image Formation Time

30ms (Typ.) tr

=10ms, tr

=20ms

Resolutions Supported

Landscape:

640 x 400 at 56 Hz

70 Hz

640 x 480 at

60 Hz / 6

Hz / 72 Hz / 75 Hz

720 x 400 at 70 Hz
800 x 600 at

56 Hz / 60 Hz / 72 Hz / 75 Hz

832 x 624 at 75 Hz
1024 x 768 at

60 Hz / 70 Hz / 72 Hz / 75 Hz

Active Display

Horizontal:

304 mm/12.0 inches

Dependent upon signal timing used, and

Area (Lanscape)

Vertical:

228 mm/9.0 inches

does not include border area.

Power Supply

AC 100-240 V, 50-60 Hz

Current Rating

1 A @ 100-240 V

Dimensions

Landscape:

350.5 mm (W) x 362.1 mm (H) x 160.7 mm (D)
13.8 inches (W) x 14.3 inches (H) x 6.3 inches (D)

Weight

4.2 kg (9.3 lbs)

Environmental Considerations

Operating Temperature:

5 °C to 35 °C

Humidity:

30% to 80%

Altitude:

0 to 3,000 m

Storage Temperature:

-20 °C to +60 °C

Humidity:

10% to 80%

Altitude:

0 to 9,500 m

NOTE:

Technical specifications are subject to change without notice.

°
°

Compostite sync. TTL Level (Positive/Negative)

Содержание E55LCD













































































Результаты поиска

Содержание E55LCD

Отзывы:

Mitsubishi E55LCD, Руководство по обслуживанию, Страница: 16 / 76

Результаты поиска

Содержание E55LCD

Отзывы: