Mitsubishi E55LCD Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 76

Mitsubishi E55LCD Скачать руководство пользователя страница 14

1-11

English-6

LEFT/RIGHT:

Controls Horizontal Image Position within the display area of the LCD.

DOWN/UP:

Controls Vertical Image Position within the display area of the LCD.

Colour Control Systems

Six colour presets select the desired colour setting.
Colour temperature increases or decreases in each preset.

RGB Grain:

Colour grain can be further managed by R.G.B. for desired saturation.

Color-Temperature:

Adjust the color temperature at the display. (9300K, 8200K, 7500K, 6500K, 5000K, USER)

Tools

OSD H-POS.:

The horizontal image is expanded to approximately 2 times.

OSD V-POS.:

The vertical image is changeable.

OSD TURN OFF:

The OSM control menu will stay on as long as it is use. In the OSM Turn Off submenu, you

can select how long the monitor waits after the last touch of a button to shut off the OSM control menu. The
preset choices are 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 120 and 180 seconds.

SHARPNESS:

This function is digitally capable to keep crisp image at any timings. It is continuously adjustable

to get distinct image or soft one as you prefer, and set independently by different timings.

OSD TRANSPARENCY:

This function allows you to set OSD transparency gradually.

LANGUAGE:

OSD control menus are available in seven languages.

INFORMATION

MONITOR INFO:

Indicates the model and serial numbers of your monitor.

ALL RESET:

Selecting ALL RESET allows you to reset all OSD control settings back to the factory settings.

POWER SAVE:

When No signal window appears, select “Power save” to Yes for DPMS function otherwise

system acts in burn-in mode.

NOTE:

AUTO ADJUST (ANALOG INPUT ONLY):

Exits the OSD control and main menu.

OSD Warning

NO SIGNAL:

This function gives a warning when there is no Horizontal or Vertical Sync Signal present and advises

you to check all Video Inputs on the monitor and computer to make sure they are properly connected. After power is
turned on or when there is a change of input signal or video is inactive, the

No Signal

window will appear.

OUT OF RANGE:

This function gives a recommendation of the optimized resolution and refresh rate. After the power is

turned on or there is a change of input signal or the video signal doesn’t have proper timing, the

Out Of Range

menu

will appear.

«
...
12
13
14
15
16
...
»

Содержание E55LCD













































































Отзывы:

Нет отзывов