12 |
P a g e
Test Run
You can test your spindle motor directly from your VFD. Follow the sequence below.
1.
Press
PU/EXT
to put the VFD into PU mode (make sure the PU LED is on).
2.
Press the
Mode
button until the MON LED turns on.
3.
Turn the wheel to set your frequency and press
Set
. The screen will flash between F and your frequency.
4.
Press
Run
and the motor should begin moving.
5.
Press
Stop/Reset
to stop the motor.
If it seems to be running well, you should continue by setting up Mach3. Make sure to exit PU mode!
