SeNd Technology Ltd
2
The above example allows bit output control
based on incoming messages from the
authorised mobile number shown in the “phone
number” box only. It can also be password
protected.
A word can also be passed by using the “word
output” check box and entering a trigger SMS
in the “Word output Change” block.
Eg if you wished to change a counter you could
used the SMS command “Counter” as the
trigger. The message you would send would be
in the format:
Counter=10000
(No spaces and case specific)
5.
Remote Access
Using the Mitsubishi ALVS software it is possible to
dial in and remotely monitor and program the
Alpha XL over GSM Network. To achieve this your
SIM card will need to be data enabled and you
need the data number to make a data connection.
Ask your network provider for this number.
Remote Access Block (M14) can be used to show a
remote connection has been made. This may be
used to inhibit operation of the process/machine
whilst remote connections are made.
You must ensure you are using the latest version of
ALVLS software (V2.4) for this function.
Authorised Number
