7
3. SPECIFICATIONS
3.1 General specifications
For the general specifications of the AJ65SBT-RPS/RPG module, refer to the
User's Manual of the small remote I/O module.
3.2 Performance specifications
The performance specifications of the AJ65SBT-RPS/RPG are shown below.
Specifications
Item
AJ65SBT-RPS
AJ65SBT-RPG
Voltage (V)
DC20.4 to DC26.4
Power
supply
Current
(mA)
0.06 (at TYP. 24VDC)
Noise immunity
Simulator noise of 1500Vp-p
First transient/burst noise IEC801-4: 1kV, obtained by a
noise simulator of 1 s noise width and 25 to 60Hz noise
frequency
Dielectric withstand
voltage
500VAC for 1 minute between all DC external terminals
and ground
Insulation resistance
10M
or higher, measured with a 500VDC insulation
resistance tester
Common
specifications
Weight (kg)
0.2
Transmission speed
(bps)
Selectable from among 156k, 625k, 2.5M, 5M and 10M
Max. number of
stages connected to
configure segment
(stages)
3
2
Max. transmission
distance of each
segment
Varies according to transmission speed. (Refer to the
User's Manual of the applicable master module.)
Max. number of
modules connected
64 (See Section 2.2 for the conditions for the number of
modules connected)
Number of stations
occupied (stations)
0 (none)
CC-Link
communication
specifications
Settable station
number
No station numbers
Connection cable
SI-200/220
QSI-185/230
GI-50/125
Applicable connector
CA7003
CA9103S
Optical
communication
specifications
Max. transmission
distance of fiber-
optic cable between
repeaters (m (ft.))
500 (1639.34)
1000 (3278.69)
2000 (6557.38)