Mitsubishi AJ65SBT-62DA, Руководство пользователя

Страница: 43 / 72

5 - 1
MELSEC-A
5 PROGRAMMING
5
5 PROGRAMMING
The programming procedure, basic read/write programs, and program examples for
the AJ65SBT-62DA are described.
When applying any of the program examples introduced in this chapter to the actual
system, verify the applicability and confirm that no problems will occur in the system
control.
Refer to the user's manual of the master module used for the master module, to
Section 3.6 for the remote registers, and to the AnSHCPU/AnACPU/AnUCPU/QCPU
(A mode) Programming Manual (Dedicated Instructions) for details of the dedicated
instructions.
5.1 Programming Procedure
Create programs for executing the digital-analog conversion of the AJ65SBT-62DA in
the following procedure.
START
Analog output enable/disable setting
(D/A conversion enable/disable setting)
COMPLETION
Output range/HOLD/CLEAR setting
Digital value setting
Analog output enable/disable specification
*2
Initial settings *1
.............
*2
.............
*1 When using the QCPU (Q mode), you can use the remote device station
initialization procedure registration function to make settings. When using the
ACPU, QCPU (A mode) or QnACPU, use the sequence program to make settings.
*2 The remote device station initialization procedure registration function cannot be
used to make settings.
Use the sequence program to make settings.