A-3
[WIRNG INSTRUCTIONS]
CAUTION
!
The communication and power cables connected to the module must be
fixed securely, e.g. contained in ducts or clamped.
A failure to do so could cause the cables to dangle, move, or be carelessly
pulled, leading to a damaged module or cable or a malfunction due to a
cable connection fault.
[STARTING AND MAINTENANCE PRECAUTIONS]
DANGER
!
While power is on, do not touch the terminals.Otherwise, an electric shock
or malfunction could occur.
!
Before starting cleaning or terminal screw retightening, always switch off
external GOT power in all phases.
A failure to do so could cause an electric shock.
Undertightening could cause the module to drop, short-circuit or
malfunction.
Overtightening could cause the module to drop, short-circuit or malfunction
CAUTION
!
Do not disassemble or modify this module.
Otherwise, a failure, malfunction, injury or fire could occur.
!
Do not touch the conducive and electronic parts of this module directly.
Otherwise, the module could malfunction or fail.
!
This module is made of resin. Do not drop it or subject it to hard impact.
This may cause the module to fail.
!
When disconnecting the communication or power cable from the module,
do not hold and pull the cable part.
When disconnecting the cable having a connector, hold the connector
plugged in the module.
Before disconnecting the cable having no connector, loosen the screws in
the module.
If the cable connected to the module is pulled, the module or cable may be
damaged or a malfunction may occur due to a cable connection fault.