21
7. Installation Procedure
Mount or dismount the module to or from the GOT in the following
1)Thread external I/O module mounting screw holes in the control box or
the like. (2-
•
3.5 mounting holes)
The external I/O module's GOT connection cable is 50cm long. Install the
external I/O module within this distance so that the GOT-end connector
of the cable may be fitted into the GOT's connector.
When mounting the external I/O module on the back of the control box
door, use care to avoid screw holes passing through the control box
surface.
2)Tighten the module fixing screws (2 pcs.) in the specified torque range 39
to 59N·cm (4 to 6kg·cm).
3)Fit the GOT-end connector of the cable into the connector in the GOT
outside.
