Performance specification
INSTALLATION NOTES AND USAGE
General specification
Transmission standard Conforming to RS232C, 25pin D-SUB, connector used
Isolation method
Photo coupler isolation
Transmission distance 15m or less (shielded cable recommended)
Current consumption
DC 5V 200mA form base unit
Related flag
and data registers
M8121:Send wait flag
D8120:Communication format
M8122:Send flag
D8122:Remainder of send data
M8123:Receive completion
D8123:Number of received data
M8124:Carrier detection
D8124:Header byte
M8161:8 bits/16 bits changeover
D8125:Terminator byte
Genelal specifications (excluding following)
Same as those for FX or FX2C base unit
Dielectric withstand voltage
500V AC 1min
Between 25-pin D-SUB and base
unit
Insulation resistaice
500V DC, 1M
Ω
by Megger
