Mitsubishi MOTORS OUTLANDER PHEV 2019, Быстрое руководство

Страница: 4 / 10

4
EV System/Selector Lever Operation
5 6
EV System/Selector Lever Operation
Step 1
Step 2
Step 3
Step 4
Step 5
Ensure that the charge connector is disconnected from the vehicle.
Ensure that the parking brake is applied.
Depress the brake pedal completely.
Press the power switch completely.
Do not release the brake pedal until the system has successfully started.
Ensure that the indicator is illuminated.
Do not operate the selector lever until the indicator is illuminated. If the selector lever
is operated while the indicator is still blinking, the system will not start.
Step 4
Step 3
Step 5
Starting the Plug-in Hybrid EV System
Is Something Really Wrong?
than 10 seconds and then repeat the startup steps 1 to 5.
or cannot be selected (display not changing to or ) using the selector lever
when the
indicator is illuminated, the brake pedal may not be depressed completely. Depress
the brake pedal completely and then repeat the start-off steps 1 to 4 before selecting or .
Important Points!
Power switch
Step 4
Step 3
Step 5
To enter the READY mode, press the power switch while holding down
the brake pedal.
To put the operation mode to OFF, press the switch once when the indicator
lamp is blue (ON) or twice when the lamp is orange (ACC) while the brake
pedal is released.
If the plug-in hybrid EV system cannot be started, return the operation mode to OFF. Wait for more
If position
LHD RHD
Starting the Plug-in Hybrid EV System
Step 1 Ensure that the charge connector is disconnected
from the vehicle.
Step 2 Ensure that the parking brake is applied.
Step 3 Depress the brake pedal completely.
Step 4 Press the power switch completely.
Do not release the brake pedal until the system
has successfully started.
Step 5 Ensure that the indicator is illuminated.
Do not operate the selector lever until the
indicator is illuminated. If the selector lever is
operated while the indicator is still blinking,
the system will not start.
Is Something Really Wrong?
If the plug-in hybrid EV system cannot be started, return
the operation mode to OFF. Wait for more than 10
seconds and then repeat the startup steps 1 to 5.
If position or cannot be selected (display not
changing to or ) using the selector lever when
the indicator is illuminated, the brake pedal may
not be depressed completely. Depress the brake pedal
completely and then repeat the start-off steps 1 to 4
before selecting or .
Important Points!
To enter the READY mode, press the power switch while
holding down the brake pedal.
To put the operation mode to OFF,
press the switch once when the
indicator lamp is blue (ON) or twice
when the lamp is orange (ACC) while
the brake pedal is released.
Use position when powerful braking is needed such as
when driving down a steep hill.
Position is only selectable from position .
Reverse
Neutral
Drive
Regenerative brake
Warning!
While driving, do not put any object near the selector lever, which may be accidentally pushed against the selector, which may then
move into .
Operating the Selector Lever
To start the vehicle from a standstill, follow the steps below.
Step 1 Ensure that the indicator is illuminated.
You cannot shift into or even if you move
the selector to those positions while the
indicator is extinguished or blinking. The
selected position display will not change to
or , either.
Step 2 Depress the brake pedal completely.
Step 3 Move the selector lever to or .
Step 4 Ensure that the selected position display shows
or .
5 6
EV System/Selector Lever Operation
Step 1
Step 2
Step 3
Step 4
Step 5
Ensure that the charge connector is disconnected from the vehicle.
Ensure that the parking brake is applied.
Depress the brake pedal completely.
Press the power switch completely.
Do not release the brake pedal until the system has successfully started.
Ensure that the indicator is illuminated.
Do not operate the selector lever until the indicator is illuminated. If the selector lever
is operated while the indicator is still blinking, the system will not start.
Step 4
Step 3
Step 5
Starting the Plug-in Hybrid EV System
Is Something Really Wrong?
than 10 seconds and then repeat the startup steps 1 to 5.
or cannot be selected (display not changing to or ) using the selector lever
when the indicator is illuminated, the brake pedal may not be depressed completely. Depress
the brake pedal completely and then repeat the start-off steps 1 to 4 before selecting or .
Important Points!
Power switch
Step 4
Step 3
Step 5
To enter the READY mode, press the power switch while holding down
the brake pedal.
To put the operation mode to OFF, press the switch once when the indicator
lamp is blue (ON) or twice when the lamp is orange (ACC) while the brake
pedal is released.
If the plug-in hybrid EV system cannot be started, return the operation mode to OFF. Wait for more
If position
LHD RHD