Mitsubishi MOTORS Outlander PHEV 2016, Руководство пользователя, Страница: 237 / 490

To temporarily increase or de-
crease the speed
E00609601306
To temporarily increase the
speed
Depress the accelerator pedal as you would
normally. When you release the pedal, you
will return to your set speed.
NOTE
l In some driving conditions, the set speed
driving may be deactivated. If this happens,
refer to “To activate” on page 7-35 and re-
peat the speed setting procedure.
To temporarily decrease the
speed
Depress the brake pedal to decrease the
speed. To return to the previously set speed,
push up the RES + switch (C).
Refer to “To resume the set speed” on page
7-38.
To deactivate
E00609702665
The set speed driving can be deactivated as
follows:
l Press the CRUISE CONTROL ON/OFF
switch (A) (Cruise control will be turned
off.)
l
Press the CANCEL switch (D).
l Depress the brake pedal.
The set speed driving is deactivated automat-
ically in any of the following ways.
l When your speed slows to about
15 km/h (9 mph) or more below the set
speed because of a hill, etc.
l
When your speed slows to about
40 km/h (25 mph) or less.
l When the Active Stability Control
(ASC) starts operating.
Refer to “Active stability control (ASC)”
on page 7-32.
Cruise control*
7-37
OGGE16E1
Starting and driving
7