6
Tape pins of Wire Harness #2 together and deploy through the left tail lamp grommet. Leave about 50 cm of
Wire Harness #2 outside and secure with one Foam Pad #4 as shown by
the arrow. Securely tape all wires to the grommet with electrical tape.
15
16
1 2 3 4 5 6
LINE COLOR
1- None
2 -White/Black line
3 - Orange / Black Llne
4 - Blue / White line
5 - Red / White line
6 - Yellow / Green Line
17
From Wire Harness #1, remove the connector housing, open it and prepare to install Wire Harness #2 pins into it.