Mitsubishi MOTORS Eclipse Cross 2018, Руководство пользователя, Страница: 260 / 538

WARNING
l
Never rely solely on the BSW system
when changing lanes. The BSW is an aid
only. It is not a substitute for your safe
and careful driving. Always check visually
behind and all around your vehicle for
other vehicles.
The performance of the BSW may vary
depending on driving, traffic and/or road
conditions.
Detection areas
The BSW uses two sensors (A) located inside
the rear bumper.
The detection areas are shown as illustrated.
WARNING
l In certain situations, the BSW may not
detect a vehicle in the detection areas or
the detection may be delayed. Some of
these include:
• When a small motorcycle or a bicycle is
behind your vehicle.
WARNING
• When a vehicle is travelling alongside
of your vehicle at nearly the same speed
for prolonged periods of time.
• When the heights of the next lane and
your lane are different.
• Immediately after the BSW has been
turned on.
• Immediately after the ignition switch is
turned to the “ON” position or the op-
eration mode is put in ON.
• Under adverse weather conditions,
such as rain, snow, strong winds, snow
or sand storms.
• When your vehicle comes too close to
another vehicle.
• While multiple vehicles are overtaking
your vehicle.
• When driving near a pot hole and
tramline.
• When a surrounding vehicle or an on-
coming vehicle is splashing water, snow
or dirt.
• When driving on a curve including the
beginning and the end of the curve.
• When driving on a road with alternat-
ing up and down steep slopes.
• When driving on a bumpy or rough
road.
• When the rear of your vehicle is weigh-
ed down or your vehicle is leaning to
the right or left due to the weight of
passengers and luggage or the improp-
er adjustment of tyre pressure.
Blind Spot Warning (BSW) (with Lane Change Assist)*
6-90
OGKE18E5
Starting and driving
6