manualshive.com logo in svg

Mitsubishi Heavy Industries TNW4E, Руководство по эксплуатации

Поделиться
Скачать
Mitsubishi Heavy Industries TNW4E Скачать руководство пользователя страница 4

1

-

-

1. Items to Observe (Safety Precautions)

• The meanings of the "signs" used in this manual are as follows.

WARNING

CAUTION

Precautions for installation

Please read this section "Items to Observe (Safety Precautions)" before using, to ensure that the 
unit is used correctly.
The precautions given here describe important information related safety, and must always be observed.
• The signs and meanings are as follow.

Never perform.

Always ground.

Never touch.

Things you should know.

ADVICE

If mishandled, may result to serious injuries or fatalities.

If mishandled, serious results could occur depending on 
the situation.

Always carry out according to the 
instructions.
Always disconnect power supply 
plug from socket.

Repairs and disassembly must be 
done by qualified personnel.

• Store the operation manual in a place that is easy to access for future reference after reading it.
• If the ownership of the product is transferred, or if the product is lent out, always hand this oper-

ation manual to the new user so that the safe and correct usage methods can be understood.

DANGER

Indicates high and imminent potentially dangerous 
situation, which if mis-handle, will result in death, injury, or 
serious accident such as damage of the refrigeration unit.

WARNING

Always ground

Incomplete grounding could lead to electric shocks.

Insufficient electric circuit capacity or incorrect work could lead to electric shocks or fires.

Always use a dedicated circuit and leakage breaker for the electric 
work.

DANGER

Cracking occurs in design panel, which cause a risk of falling down of panel while 
the vehicle is running.

Do not paint on resinic design panel. (This will make refrigeration 
unit out of warranty.)

It may cause a serious accident if customer modify the refrigeration unit or 
change the specification by himself/herself.

Do not modify or perform specification change for refrigeration and 
vehicle. (This will make refrigeration unit out of warranty.)

TSJ012A149A英トンボPDF  16.8.31 10:21 AM  ページ 1

Содержание TNW4E

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды