7-8
Chapter 7 MAINTENANCE SCHEDULE
*1 It is not a item supplied from Mitsubishi Heavy Industries, Ltd., however, please maintain the part regularly to use
the engine securely and effectively.
*2 Items require special tools or large equipment. For the servicing of those items, contact a dealer of Mitsubishi
Heavy Industries, Ltd.
Every 4 years
Top End of the Engine - Overhaul
Remove the cylinder head, and inspect and service the combustion cham-
bers. (If the abnormalities of first and second cylinders are found, inspect all
cylinders. )
*2
Checking Oil Cooler for Contamination, Clogging and Leakage
*2
Checking Oil Pump for Discoloration and Other External Defects
*2
Governor Oil Filter - Change
8-16
Fuel Tank - Clean
*1
8-6
Fuel Injection Pump - Inspect and Test (Replace Parts as Necessary)
*2
Governor - Inspect and Test (Replace Parts as Necessary)
*2
Radiator Fins - Check and Clean
8-19
Rubber Hose - Replace
*2
Air Cleaner Element - Clean, Check and Replace
8-22
Protective Devices - Repair or Replace *1
Oil pressure gauge, coolant temperature gauge, oil temperature gauge,
exhaust temperature gauge, tachometer
*2
Every 8 years
Engine - Major Overhaul
Disassemble engine, clean, check and change major parts.
*2
Damper - Replace
*2
Oil Pump - Repair or Replace
*2
Fuel Injection Nozzle - Nozzle Tip Replacement
(Check the Spray Condition and Adjust the Fuel Injection Pressure After
Replacement)
*2
Rubber Parts and O-rings - Replace
*2
Unit Seal and Oil Seal of Water Pump - Replace
*2
Turbocharger - Disassemble and Inspect
*2
Aircooler - Disassemble and Clean
*2
Vibration-isolating Rubber - Repair or Replace *1
*2
Couplings - Repair or Replace *1
*2
Protective devices - Repair or replace *1
*2
Protective devices - Repair or replace *1
*2
Stop Solenoid - Inspect or Replace *1
*2
Ball Tap of Water Tank - Repair or Replace *1
*2
Other Consumables - Replace
*2
Table 7-2 Periodic Maintenance Chart for Emergency Engine
Interval and service item
Refer-
ence
page