Mitsubishi Heavy Industries FDCVA1002HESAR, Техническое руководство

Страница: 61 / 329

-
60
-
Model FDUMA302HEN2R
Model
Item
FDUMA302HEN2R
FDUMA302R FDCVA302HENR
Nominal cooling capacity (1)
kW
7.1 [3.5~8.0]
Nominal heating capacity (1) kW 8.0 [4.0~9.0]
Power source 1 Phase, 220-240V, 50Hz/220V, 60Hz
Operation data
(3)
Cooling power consumption kW 2.08/2.08
Running current (Cooling) A 9.2/9.6
Power factor (Cooling) % 98/98
Heating power consumption kW 2.21/2.21
Running current (Heating) A 10.2/10.7
Power factor (Heating) %
94/94
Inrush current (L.R.A) A
5
Noise level dB(A) Hi:35 Me:32 Lo:29 48
Exterior dimensions
Height
×
Width
×
Depth
mm 299 × 950 × 635 750 × 880 (+88) × 340
Net weight kg 40 60
Refrigerant equipment
Compressor type & Q’ty
– 2YC45DXD × 1
Starting method – Direct line start
Heat exchanger Louver fin & inner grooved tubing Straight fin & inner grooved tubing
Refrigerant control – Electronic expansion valve
Refrigerant R410A
Quantity kg – 2.95 [Pre-charged up to the piping length of 30m]
Refrigerant oil r – 0.65 (FVC50K)
Defrost control Microcomputer controlled de-icer
Air handling equipment
Fan type & Q’ty
Multiblade centrifugal fan × 2 Propeller fan
×
1
Motor W 100
×
1 120
×
1
Starting method Direct line start Direct line start
Air fl ow (Standard) CMM Hi:20 Me:18 Lo:15 Cooling type:60, Heating type:48.5
Available static pressure Pa Standard: 50, Max: 85 –
Outside air intake – –
Air filter, Q’ty – –
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber mount (for compressor)
Electric heater W – 20 (Crank case heater)
Operation control
Operation switch
Wired remote control switch (Optional : RC-E1R)
Wireless kit (Optional : RCND-KIT-HER)
– (Indoor unit side)
Room temperature control Thermostat by electronics –
Safety equipment
Internal thermostat for fan motor.
Frost protection thermostat.
Internal thermostat for fan motor.
Anomalous discharge temperature protection.
Installation data
Refrigerant piping size mm
(in)
Liquid line:
φ
9.52 (3/8
″
) Gas line:
φ
15.88 (5/8
″
)
Connecting method Flare piping
Drain hose Connectable with VP25 (I.D. 25mm, O.D. 32mm) –
Insulation for piping Necessary (both Liquid & Gas lines)
Accessories Mounting kit. Drain hose
Optional parts Filter kit (UM-FL2E)
Notes (1) The data are measured at the following conditions.
Item
Operation
Indoor air temperature Outdoor air temperature
Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C
ISO-T1
Heating 20˚C – 7˚C 6˚C
(2) This packaged air-conditioner is manufactured and tested in conformity with the following standard.
ISO-T1 “UNITARY AIR-CONDITIONERS”
(3) The operation data indicate when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
(4) Values in [ ~ ] show the minimum to maximum range.