EN-25
ENGLIS
H
Advanced features
Freeze
To stop the motion in the image temporarily (or to dis-
play a still image):
Press the FREEZE button on the remote control.
•
The image freezes temporarily.
To resume the motion in the image:
Press the FREEZE button on the remote control again.
Important:
•
Do not keep displaying a still picture for an extended period of
time, as the afterimages may linger on the screen.
Password function
This projector provides the password function that is intended to pre-
vent wrong operations by children and set controlled access for speci-
fied users.
DISPLAY INPUT............ When the projector is turned on, the star-
tup screen (or splash screen) appears and
stays on the screen until the password is
entered. When the password is entered,
the startup screen switches to the regular
operation screen.
MENU ACCESS ............ All the buttons except for the POWER but-
ton on the projector are disabled. (The
buttons on the remote control are
enabled.) You can use this mode to pre-
vent wrong operations by children and set
controlled access for specified users.
To enable the password function:
1.
Display the FEATURE menu.
2.
Press the
S
or
T
button to select PASSWORD FUNCTION.
3.
Press the
W
or
X
button to change the mode among DISPLAY
INPUT ,
MENU
ACCESS .
•
When the password has already been set, the mode never
changes. Press the ENTER button to cancel the password
function and try again.
4.
Press the ENTER button.
•
The screen for setting the password function appears.
5.
Press the ENTER button.
•
The screen for entering a password appears.
6.
Enter a 4 - 8 digit password using the
S
,
T
,
W
or
X
buttons on
the remote control as shown below.
(
S
=1,
X
=2,
T
=3,
W
=4)
7.
Press the ENTER button.
•
To cancel the procedure, press the MENU button.
8.
Enter the password again for confirmation using the same steps.
9.
Press the ENTER button.
•
If the entered passwords are incorrect, an error message
appears.
•
To cancel the procedure, press the MENU button.
To cancel the password function:
1.
Display the FEATURE menu.
2.
Press the
S
or
T
button to select PASSWORD FUNCTION.
3.
Press the ENTER button.
•
The screen for canceling the password function appears.
4.
Press the ENTER button.
•
The screen for entering the password appears.
5.
Enter a 4 - 8 digit password using the
S
,
T
,
W
or
X
buttons on
the remote control as shown below.
(
S
=1,
X
=2,
T
=3,
W
=4)
6.
Press the ENTER button.
•
If you enter a wrong password, an error message appears.
•
To cancel the procedure, press the MENU button.
Important:
•
When the screen for entering the password is displayed, to disable
the password function, hold down the SOURCE and POWER but-
tons on the control panel together for about three seconds.
Magnify
By pressing the MAGNIFY button on the remote control, you can mag-
nify the image to view the details.
•
The MAGNIFY mode doesn't function with some input signals. For
details, see page 35.
•
The MAGNIFY mode doesn't work with video or S-video signal.
MAGNIFY
To use the MAGNIFY mode:
1.
Press the MAGNIFY button.
•
You can select the area to be magnified by pressing the
S
,
T
,
W
or
X
button on the remote control.
•
You can change the magnification of the selected area by
pressing the VOLUME
S
or
T
button.
2.
Press the MAGNIFY button again to exit the MAGNIFY mode.
•
The regular operation screen will appear.
Important:
•
In the MAGNIFY mode, you can't adjust the volume.
MENU ACCESS
FEATURE
opt.
LOCK
UNLOCK
OK
OK
PASSWORD
CONFIRM
1
3
2
4
O K : ENTER
CANCEL : MENU
MENU ACCESS
FEATURE
opt.
LOCK
UNLOCK
OK
OK
PASSWORD
1
3
2
4
O K : ENTER
CANCEL : MENU
Magnified image
