Mitsubishi Electric WSH-AP42WI, Руководство по обслуживанию

Страница: 46 / 56

OPERATING PROCEDURE PHOTOS/FIGURES
Removing the panel (R) (Photos 1, 2, Figure 1)
(1) Remove the front panel and the horizontal vanes (U)
(L).
(2) Remove the screw cap on the panel (R), and the
screw.
(3) Remove the 2 screws of the panel (R), and pull the
top of the panel (R) toward you to remove.
Removing the panel (L) (Photos 1, 2, Figure 1)
(1) Remove the front panel and the horizontal vanes (U)
(L).
(2) Remove the screw cap on the panel (L), and the
screw.
(3) Remove the screw of the panel (L), and pull the top of
the panel (L) toward you to remove.
Removing the panel (F) (Photos 1, 2, 3 Figure 1)
(1) Remove the front panel and the horizontal vanes (U)
(L).
(2) Remove the panels (R) (L).
(3) Remove the Wi-Fi interface on the right side of the
panel (F). Pull out its cable, and remove the cable tie
(Refer to section 2). (MSZ-AP∙VGK)
(4) Remove the panel (F) from the bottom to the top.
Removing the panel (U) (Photo 2, Figure 1)
(1) Remove the front panel and the horizontal vanes (U)
(L).
(2) Remove the panels (R) (L).
(3) Remove the center hook of the panel (U), and pull it
toward you to remove.
46
Photo
2
Screws of the
panel (R)
Panel (R) Panel (L)
Panel (F)
Screw of the
panel
Screw of the
panel
Panel (U) Hook of panel (U)
Screw of the
panel (L)
OBH788C