EN-30
Supervising and controlling by computer
You can supervise and control the projector’s operation using a personal computer via a LAN network.
• To supervise and control the projector, install the software “Mitsubishi Projector Control Device Installer *” con-
tained in the attached CD-ROM. For the installation procedure and usage of the software, see the “User Manual for
LAN Control Utility” contained in the attached CD-ROM.
*)
Functions
•
Setting of the projector’s IP address
•
Setting of password, display language, and LAN control
• PJLink™
certifi cation setting (telnet function)
•
Startup of the controlling /supervising tool (ProjectorView) using the Web browser
Major functions
ProjectorView
The controlling/supervising tool using the Web browser
PJLink™
This projector supports standard protocol
PJLink™
for projector control and you can control and monitor projector’s
operations using the same application among projectors of different models and different manufacturers.
About PJLink™
• To use PJLink™ function, the PJLink™ application software is required.
• For
the
specifi cations of
PJLink™
, access to the Web site of
Japan Business Machine and Information System
Industries Association (JBMIA)
.
• This projector is fully compliant to the specifi cations of JBMIA
PJLink™
Class 1. It supports all the commands
defi ned by
PJLink™
Class 1, and the compliance has been verifi ed with the
PJLink™
standard specifi cations
Version 1.0
Connection
Computer
To LAN terminal
LAN cable (option)
(100BASE-TX or 10BASE-T should be supported.)
LAN cable (option)
(100BASE-TX or 10BASE-T
should be supported.)
External HUB
• Use a straight-through category-5 cable for LAN connection.
• Don’t touch the metal parts of the LAN connector and LAN cable because static electricity may be discharged from
your body, causing damage to the projector.
Using the User Manual
The
“
User Manual for LAN Control Utility
”
is prepared in the Portable Document Format (PDF) in the CD-ROM.
Opening the User Manual:
1. Load the CD-ROM into the CD-ROM drive.
2. Open CD-ROM
“
WD2000.
”
3. Double-click on
“
MANUAL_LAN.HTML
”
within the CD-ROM. A language selection list for the User Manual will be
displayed.
4. Move the mouse pointer to the desired language and click.
Advanced features (continued)
